doc: update Doxyfile for Doxygen 1.8.13

# Doxyfile 1.8.9.1

# Doxyfile 1.8.13

# This file describes the settings to be used by the documentation system

# doxygen (www.doxygen.org) for a project.

MARKDOWN_SUPPORT       = YES

# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up

# to that level are automatically included in the table of contents, even if

# they do not have an id attribute.

# Note: This feature currently applies only to Markdown headings.

# Minimum value: 0, maximum value: 99, default value: 0.

# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.

TOC_INCLUDE_HEADINGS   = 0

# When enabled doxygen tries to link words that correspond to documented

# classes, or namespaces to their corresponding documentation. Such a link can

# be prevented in individual cases by putting a % sign in front of the word or

DISTRIBUTE_GROUP_DOC   = NO

# If one adds a struct or class to a group and this option is enabled, then also

# any nested class or struct is added to the same group. By default this option

# is disabled and one has to add nested compounds explicitly via \ingroup.

# The default value is: NO.

GROUP_NESTED_COMPOUNDS = NO

# Set the SUBGROUPING tag to YES to allow class member groups of the same type

# (for instance a group of public functions) to be put as a subgroup of that

# type (e.g. under the Public Functions section). Set it to NO to prevent

WARN_NO_PARAMDOC       = NO

# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when

# a warning is encountered.

# The default value is: NO.

WARN_AS_ERROR          = NO

# The WARN_FORMAT tag determines the format of the warning messages that doxygen

# can produce. The string should contain the $file, $line, and $text tags, which

# will be replaced by the file and line number from which the warning originated

# The INPUT tag is used to specify the files and/or directories that contain

# documented source files. You may enter file names like myfile.cpp or

# directories like /usr/src/myproject. Separate the files or directories with

# spaces.

# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING

# Note: If this tag is empty the current directory is searched.

INPUT                  = ../include/spdk \

# If the value of the INPUT tag contains directories, you can use the

# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and

# *.h) to filter out the source-files in the directories. If left blank the

# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,

# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,

# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,

# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,

# *.qsf, *.as and *.js.

# *.h) to filter out the source-files in the directories.

#

# Note that for custom extensions or not directly supported extensions you also

# need to set EXTENSION_MAPPING for the extension otherwise the files are not

# read by doxygen.

#

# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,

# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,

# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,

# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,

# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf.

FILE_PATTERNS          =

# Note that the filter must not add or remove lines; it is applied before the

# code is scanned, but not when the output code is generated. If lines are added

# or removed, the anchors will not be placed correctly.

#

# Note that for custom extensions or not directly supported extensions you also

# need to set EXTENSION_MAPPING for the extension otherwise the files are not

# properly processed by doxygen.

INPUT_FILTER           =

# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how

# filters are used. If the FILTER_PATTERNS tag is empty or if none of the

# patterns match the file name, INPUT_FILTER is applied.

#

# Note that for custom extensions or not directly supported extensions you also

# need to set EXTENSION_MAPPING for the extension otherwise the files are not

# properly processed by doxygen.

FILTER_PATTERNS        =

#---------------------------------------------------------------------------

# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output

# The default value is: NO.

# The default value is: YES.

GENERATE_HTML          = YES

# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

# page will contain the date and time when the page was generated. Setting this

# to NO can help when comparing the output of multiple runs.

# to YES can help to show when doxygen was last run and thus if the

# documentation is up to date.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

PAPER_TYPE             = a4

# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names

# that should be included in the LaTeX output. To get the times font for

# instance you can specify

# EXTRA_PACKAGES=times

# that should be included in the LaTeX output. The package can be specified just

# by its name or with the correct syntax as to be used with the LaTeX

# \usepackage command. To get the times font for instance you can specify :

# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}

# To use the option intlimits with the amsmath package you can specify:

# EXTRA_PACKAGES=[intlimits]{amsmath}

# If left blank no extra packages will be included.

# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_BIB_STYLE        = plain

# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated

# page will contain the date and time when the page was generated. Setting this

# to NO can help when comparing the output of multiple runs.

# The default value is: NO.

# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_TIMESTAMP        = NO

#---------------------------------------------------------------------------

# Configuration options related to the RTF output

#---------------------------------------------------------------------------

#

# Note that enabling this option will significantly increase the time of a run.

# So in most cases it will be better to enable call graphs for selected

# functions only using the \callgraph command.

# functions only using the \callgraph command. Disabling a call graph can be

# accomplished by means of the command \hidecallgraph.

# The default value is: NO.

# This tag requires that the tag HAVE_DOT is set to YES.

#

# Note that enabling this option will significantly increase the time of a run.

# So in most cases it will be better to enable caller graphs for selected

# functions only using the \callergraph command.

# functions only using the \callergraph command. Disabling a caller graph can be

# accomplished by means of the command \hidecallergraph.

# The default value is: NO.

# This tag requires that the tag HAVE_DOT is set to YES.

DIRECTORY_GRAPH        = NO

# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

# generated by dot.

# generated by dot. For an explanation of the image formats see the section

# output formats in the documentation of the dot tool (Graphviz (see:

# http://www.graphviz.org/)).

# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order

# to make the SVG files visible in IE 9+ (other browsers do not have this

# requirement).

# Possible values are: png, jpg, gif and svg.

# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,

# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and

# png:gdiplus:gdiplus.

# The default value is: png.

# This tag requires that the tag HAVE_DOT is set to YES.

PLANTUML_JAR_PATH      =

# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a

# configuration file for plantuml.

PLANTUML_CFG_FILE      =

# When using plantuml, the specified paths are searched for files specified by

# the !include statement in a plantuml block.